FLOOD DIVERT BARRIER
The Flood Divert Barrier was a BSI Kitemarked barrier but unfortunately they changed the standard by introducing an impact test. BSI have not been able to offer us a test facility large enoughto test the barriers so we have had to withdraw from the scheme. The barriers are tested to PAS 1188-1:2014 that offers protection as a single panel up to 2534mm wide x 1015mm high to a DMWD (designated Maximum Water Depth) of 840mm.
The Flood Divert Barrier is a high strength yet lightweight composite panel that requires no tools to install and can be deployed in a matter of seconds when required. See the video below of a customer installing the barrier, you only need to lift it slightly off the floor to drop it into position, then slide the clamps into place before throwing the levers to activate the sealing system. There is an aluminium frame which is permanently fixed to the aperture (this can be powder coated any RAL colour so that it blends in with is surroundings (as you can see on the photo below, the frame has been powder coated white so that it matches the door frame making aesthetically pleasing)
All our barriers are made to measure, call us today for more information on 01904 607681
To order Flood Divert barriers to fit yourself please see the attached survey sheet form on the button below, please fill a form in per barrier, scan or take a photo of the form along with a photo of where the barrier is to be positioned and send back to us at info@flooddivert.co.uk , we will then confirm a cost and approx lead time.
Photo above showing barrier in position and ready to protect your property, photo below shows the frame that is permanently fixed to the walls/frame, these are always powder coated (any colour) so that they blend in with the surroundings.
